|
|
|
Festool HL 850 E Planer
|
NS574553
|
Detailed Description
Unlimited rabbetingUsing an electric planer right up to the
edge or on rabbets often produces unsatisfactory results, as the machine
leaves a lip that has to be removed by handunless you have the Festool
HL 850 planer. The HL 850 lets you cut flush to an adjacent surface
because it can plane across the entire width of the rabbet. Because the
planer head is mounted to one side, it sits flush with the opposite side
of the planer housing. The retractable side guard makes planing safer,
and it swings up and to the side as the rabbet depth increases. Planing
up to the edge in deep rabbets is no longer a problem.
Near Total Chip Extraction
Efficient chip extraction with
left or right side mounting. For best performance use with Festool CT
22 or CT 33 dust extractors and the 36mm hose.
Rotary Handle Depth Adjustment
The front handle doubles as a
depth control knob with a cut depth up to 3 9/64".
Unlimited Rabbeting Depth
The planer head allows you to work
right up to the edge.
Thumb-Lock Depth Control
Makes depth setting a streamlined
one-hand operation so you can easily adjust your depth settings to match
the resistance of the material.
MMC Electronics
Equipped with soft-start for no-jolt starts,
and constant speed under load, for consistent cutting speed and smooth
results.
Quick Blade Changes
Loosen 3 screws, replace the blade,
tighten back up and that is it! The blade is self-aligning.
Interchangable Heads
For different effects from distressed
to hand-hewn textured effects.
Single Knife Cutter Head
Spiral, metal carbide, cutter
head design with replaceable cutting knife for a smooth, chatter-free
cut.
Converts To A Jointer
With the addition of a bench unit
stand and angle stop, the HL 850 becomes a stationary jointer for
working edges.
Includes parallel stop, standard planer head, solid carbide standard blade, rabbet depth guide and Systainer
| Cutting depth
|
0 - 9/64" ((0 - 3.5 mm)
|
| Drive shaft speed
|
10,000 rpm
|
| Head width
|
3 15/64" (82 mm)
|
| Noise level at idle
|
79 dB (A)
|
| Power consumption
|
850 watts / 7 amp 120 volts AC
|
| Rabbeting depth
|
Unlimited
|
| Weight
|
8.6 lbs. (3.9 kg))
|
|
|
|